Interior/Blistering

Example of blistering


Bubbles resulting from localized loss of adhesion, and lifting of the paint film from the underlying surface.

POSSIBLE CAUSES:

  • Applying oil-based or alkyd paint over a damp or wet surface.
  • Moisture seeping into the home through the exterior walls (less likely with latex paint).
  • Exposure of latex paint film to high humidity or moisture shortly after paint has dried, especially if there was inadequate surface preparation.

SOLUTION:

  • If blisters do not go all the way down to the substrate: Remove blisters by scraping, and sanding, and repaint with a quality acrylic latex interior paint. If blisters go down to the substrate: Remove the source of moisture, if possible. Repair loose caulking; consider installing vents or exhaust fans. Remove blisters as above, remembering to prime before applying the top coat.
Advertisements

About this entry